Get 2025 Free SAP C_CPI_2404 Exam Practice Materials Collection
Get Latest and 100% Accurate C_CPI_2404 Exam Questions
SAP C_CPI_2404 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 20
What are some message protocols that the API Management capability within SAP Integration Suite supports? Note: There are 3 correct answers to this question.
- A. IDoc
- B. Data
- C. SOAP
- D. RFC
- E. REST
Answer: B,C,E
Explanation:
The API Management capability within SAP Integration Suite supports the following message protocols: SOAP, REST, and Data. SOAP is a protocol for exchanging structured XML messages between web services. REST is an architectural style for designing web services that use HTTP methods and formats. Data is a protocol for sending and receiving binary or text data over HTTP or HTTPS. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 21
In a Content Modifier, you want to set up a call to the message body of the previous Content Modifier. Which notation do use to implement this?
- A. S{in body)
- B. S(inbody)
- C. S[bodyin]
- D. S{body.in}
Answer: A
Explanation:
To access the message body of the previous Content Modifier step in an integration flow, you must use the notation S{in body) in the current Content Modifier step. This notation means that you want to read the value from the in-message body of the exchange container. The exchange container is used to store additional data besides the message that is being processed by SAP Integration Suite. It has two message containers: in-message and out-message. The in-message contains the original message that was received by the integration flow, while the out-message contains the modified message that will be sent by the integration flow. Reference: Content Modifier Basics | SAP Help Portal, Exchange Container | SAP Help Portal
NEW QUESTION # 22
You have set up an integration process to use a SOAP adapter. Which event allows you to run the integration flow directly after deployment?
- A. Start Message
- B. Start Event
- C. End Message
- D. End Event
Answer: A
Explanation:
A Start Message event allows you to run the integration flow directly after deployment. A Start Message event is triggered when a message arrives at the integration flow through an inbound channel, such as a SOAP adapter. You can use a Start Message event to initiate an integration process based on a message input. Reference: Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 23
You want to set up Exchange Properties in an integration flow. Besides a Con-tent Modifier, what can you use?
- A. Groovy SDK scripting
- B. XML scripting
- C. Python scripting
- D. Batch scripting
Answer: A
Explanation:
The Groovy SDK scripting can be used to set up Exchange Properties in an integration flow. The Groovy SDK scripting allows you to access and manipulate message headers, properties, and payloads using Groovy scripts. You can use the setProperty method to set an Exchange Property with a name and a value. Reference: Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 24
You have set up a basic authentication policy, but the API proxy returns an HTTP status of 401.What could be a reason?
- A. In the AssignMessage policy, the AssignTo tag has the type="postFlow"
- B. In the AssignMessage policy, the AssignTo tag has the type="request"
- C. In the AssignMessage policy, the Assign To tag has the type="response"
- D. In the AssignMessage policy, the AssignTo tag has the type="preflow"
Answer: C
Explanation:
A possible reason why the API proxy returns an HTTP status of 401 after setting up a basic authentication policy is that in the AssignMessage policy, the AssignTo tag has the type="response". This means that the basic authentication value is assigned to the response header instead of the request header. This will cause an authentication failure when calling the backend server or service that requires basic authentication. To fix this issue, you should change the type attribute of the AssignTo tag to type="request". This will ensure that the basic authentication value is assigned to the request header before sending it to the target endpoint. Reference: Basic Authentication | SAP Help Portal, Assign Message Policy | SAP Help Portal
NEW QUESTION # 25
You want to use an HTTPS endpoint from an integration flow. In which of the following must you use the HTTP client?
- A. API Management capability within SAP Integration Suite
- B. SAP Business Application Studio
- C. Open Connectors capability within SAP Integration Suite
- D. SAP Integration Suite, advanced event mesh
Answer: C
Explanation:
To use an HTTPS endpoint from an integration flow, you can use the Open Connectors capability within SAP Integration Suite. Open Connectors is a feature that allows you to connect to over 160 third-party applications using standardized and normalized APIs. You can use the HTTP client connector to make HTTP or HTTPS requests to any endpoint that supports these protocols. You can configure the HTTP client connector with various parameters, such as URL, method, headers, query parameters, body, and authentication. Reference: Open Connectors | SAP Help Portal, HTTP Client Connector | SAP Help Portal
NEW QUESTION # 26
You configured a content modifier as follows: Action Create. Name: ProductID. Source Type: XPath. Source Value: //ProductID. Data Type: java lang string. After testing the content modifier, you receive an error message that contains the following fragment: java.lang.ClassNotFoundException java lang string. What caused the error message?
- A. Incorrect name
- B. Incorrect data type
- C. Incorrect source type
- D. Incorrect source value
Answer: B
Explanation:
The error message is caused by an incorrect data type in the content modifier configuration. The data type should be java.lang.String instead of java lang string. The data type defines the type of the value that will be stored in the header or property of the message. It should match one of the supported Java classes, such as java.lang.String, java.lang.Integer, java.lang.Boolean, and so on. If the data type is not valid, a java.lang.ClassNotFoundException will be thrown. Reference: Content Modifier | SAP Help Portal, Getting clear with SAP Integration Suite Content Modifier | SAP Blogs
NEW QUESTION # 27
Which of the following are markup languages that you can use to describe APIs? Note: There are 2 correct answers to this question.
- A. CXML
- B. HTML
- C. OpenAPI
- D. RAML
Answer: C,D
Explanation:
RAML and OpenAPI are markup languages that you can use to describe APIs. RAML stands for RESTful API Modeling Language and is based on YAML. OpenAPI is a specification for describing RESTful APIs and is based on JSON or YAML. Both languages allow you to define the structure, parameters, responses, and documentation of your APIs. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 28
What can you use to prevent overload in an OData request and reply call?
- A. Stop parameter
- B. Paging
- C. HTTP adapter
- D. Query filter
Answer: B
Explanation:
To prevent overload in an OData request and reply call, you can use paging. Paging is a technique that allows you to retrieve a large number of data sets in smaller chunks or pages. You can use the OData query options $top and $skip to specify how many records you want to fetch and how many records you want to skip in each request. This reduces the network load and improves the performance of the OData service. Reference: OData API | SAP Help Portal, SAP Integration Suite: enrich a payload with OData Service | SAP Blogs
NEW QUESTION # 29
You want to set up an SAP backend system through the Cloud Connector with an API provider. Which connection type do you use?
- A. On-premise
- B. Cloud Integration
- C. Internet
- D. Open Connectors
Answer: A
Explanation:
To connect an SAP backend system through the Cloud Connector with an API provider, you must use the on-premise connection type. The Cloud Connector acts as a link between SAP Integration Suite and on-premise systems, enabling secure and controlled access to the backend resources. The on-premise connection type allows you to specify the internal host and port of the backend system, as well as the virtual host and port that will be exposed to SAP Integration Suite. You can also define access control rules and protocols for the on-premise connection. Reference: Part 2: Connect to on-premise APIs from SAP Cloud Platform API Management Cloud Foundry Environment | SAP Blogs, How to configure SAP Cloud Connector & Create API using SCP API Management | SAP Blogs
NEW QUESTION # 30
Which data store operation can you use to save a customer ID?
- A. SELECT
- B. WRITE
- C. GET
- D. POST
Answer: B
Explanation:
To save a customer ID in a data store, you can use the WRITE operation. The WRITE operation allows you to store a value in a data store entry with a specified key. You can use the WRITE operation to create or update a data store entry with a customer ID as the key and a value as the payload. Reference: Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 31
When does the "Trace" log level expire and when will the log files be re-moved?
- A. Expiration: 10 minutes Removal: After 1 hour
- B. Expiration: 15 minutes Removal: After 10 hours
- C. Expiration. 10 minutes Removal. After 24 hours
- D. Expiration: 15 minutes Removal: After 24 hours
Answer: A
Explanation:
The "Trace" log level expires after 10 minutes and the log files are removed after 1 hour. The "Trace" log level is the most detailed log level that can be set for an integration flow. It records all the information about the message processing, such as headers, properties, payloads, attachments, and exceptions. However, it also consumes more resources and storage space than other log levels. Therefore, it is recommended to use it only for troubleshooting purposes and for a short duration. The "Trace" log level can be activated from the Monitor Message Processing view or from the integration flow editor. Reference: Log Levels | SAP Help Portal, Activating Trace Log Level | SAP Help Portal
NEW QUESTION # 32
You want to implement a synchronous call to a remote HTTP API as an integration flow component. Which adapter can you use?
- A. SFTP
- B. Mail
- C. AMQP
- D. OData
Answer: D
Explanation:
You can use an OData adapter to implement a synchronous call to a remote HTTP API as an integration flow component. An OData adapter allows you to send and receive messages using the OData protocol. OData stands for Open Data Protocol and is a standard for exposing and consuming data over HTTP or HTTPS. You can use an OData adapter to communicate with OData services that support CRUD (Create, Read, Update, Delete) operations on resources. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 33
You have created an API provider of the type Internet. What http response code indicates success?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
The http response code that indicates success is 200. The 200 response code means that the request was successfully processed and the response contains the expected data. Other response codes in the 2xx range also indicate success, but with some variations. For example, 201 means that a resource was created, 202 means that a request was accepted but not completed yet, and 204 means that there is no content in the response. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 34
What are some advantages of creating an OData interface through an API pro-vider? Note: There are 2 correct answers to this question.
- A. Automatic creation of a RAML specification
- B. Automatic creation of a Swagger UI
- C. Automatic creation of a WSDL specification
- D. Automatic creation of an openAPI specification
Answer: B,D
Explanation:
Some advantages of creating an OData interface through an API provider are automatic creation of a Swagger UI and an openAPI specification. A Swagger UI is a web-based tool that allows you to interact with the OData service and test its functionality. An openAPI specification is a standard format for describing the OData service and its metadata, which can be used by other tools and applications. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 35
You want to access individual entities of an HTTP call over XPath. What must you do if no namespace mapping exists?
- A. Convert the namespaces to XML
- B. Remove the namespaces.
- C. Convert the namespaces to JSON.
- D. Remove the XML prolog.
Answer: B
Explanation:
If no namespace mapping exists, you must remove the namespaces to access individual entities of an HTTP call over XPath. Namespaces are prefixes that identify the source or context of an XML element or attribute. If the namespaces are not mapped to a URI, they can cause errors or conflicts when using XPath expressions. Therefore, you must remove the namespaces before applying XPath queries.
Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 36
What are the key capabilities of the SAP BTP Integration Suite? Note: There are 2 correct answers to this question.
- A. API Management
- B. SAP Business Application Studio
- C. Open Connectors
- D. Connectivity Service
Answer: A,D
Explanation:
The key capabilities of the SAP BTP Integration Suite include API Management and Connectivity Service. API Management allows you to create, publish, monitor, and secure APIs across different environments and platforms. Connectivity Service enables you to establish secure and reliable connections between cloud applications and on-premise systems using various protocols and adapters. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 37
What are some aspects of "holistic integration" of the SAP Integration Suite? Note: 3 answers are correct.
- A. Event Integration
- B. Process Integration
- C. Domain Integration
- D. Cloud Integration
- E. Data Integration
Answer: A,B,E
Explanation:
Some aspects of "holistic integration" of the SAP Integration Suite are process integration, event integration, and data integration. Process integration refers to the orchestration and automation of business processes across different systems and applications. Event integration refers to the communication and coordination of events between different sources and consumers. Data integration refers to the extraction, transformation, and loading of data between different sources and targets. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 38
In the Cloud Integration capability within SAP Integration Suite, which internal message format is used?
- A. XML
- B. XSLT
- C. JSON
Answer: A
Explanation:
In the Cloud Integration capability within SAP Integration Suite, XML is the internal message format that is used. XML stands for Extensible Markup Language and is a standard format for representing structured data. All messages that are processed by the Cloud Integration capability are converted to XML internally and then transformed to the desired format at the outbound channel. Reference: Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 39
Using the Test Connectivity function, you want to test a connection to a backend system. The connection is provided by a Cloud Connector. Which parameter is required for the connection test?
- A. Subaccount ID
- B. Host
- C. Location ID
- D. Connector ID
Answer: C
Explanation:
To test a connection to a backend system that is provided by a Cloud Connector, you must specify the location ID as a parameter for the connection test. The location ID is a unique identifier that represents a Cloud Connector instance in a specific network location. It is used to route requests from SAP Integration Suite to the correct Cloud Connector instance and then to the backend system. You can find the location ID in the Cloud Connector administration UI under Configuration Location ID. Reference: Cloud Connector Connectivity Tests | SAP Help Portal, Cloud Connector Configuration | SAP Help Portal
NEW QUESTION # 40
What are some advantages of the cloud integration capability within SAP Integration Suite? Note: There are 2 correct answers to this question.
- A. Customer-to-Customer(C2C) integrations can be developed
- B. A local installation is not required.
- C. Integration processes can be developed offline.
- D. Predefined scenarios can be used out-of-the-box.
Answer: B,D
Explanation:
Some advantages of the cloud integration capability within SAP Integration Suite are:
A local installation is not required. The cloud integration capability is a cloud-based service that runs on SAP Business Technology Platform (BTP). It does not require any installation or maintenance on your local system. You can access it from any web browser and start developing and deploying integration flows using a graphical user interface or an Eclipse-based tooling.
Predefined scenarios can be used out-of-the-box. The cloud integration capability provides a rich set of predefined integration scenarios that cover various use cases and domains, such as SAP-to-SAP integration, SAP-to-non-SAP integration, hybrid integration, process orchestration, and so on. You can browse and discover these scenarios from the Discover page of the cloud integration web UI or from the SAP API Business Hub. You can use these scenarios as they are or customize them according to your needs. Reference: Cloud Integration Capability Overview | SAP Help Portal, Discover Integration Content | SAP Help Portal
NEW QUESTION # 41
Where can you find more information about APIs, policies, and integrations?
- A. SAP Business Accelerator Hub
- B. Open Connectors capability within SAP Integration Suite
- C. Cloud Integration capability within SAP Integration Suite
Answer: A
Explanation:
You can find more information about APIs, policies, and integrations in the SAP Business Accelerator Hub. The SAP Business Accelerator Hub is a central place where you can discover, explore, and consume pre-built integrations, APIs, and best practices for various business scenarios and industries. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 42
Which of the following capabilities within SAP Integration Suite are core for integration? Note: There are 3 correct answers to this question.
- A. API Management
- B. Open Connectors
- C. Integration Assessment
- D. Cloud Integration
- E. Integration Advisor
Answer: A,C,D
Explanation:
The following capabilities within SAP Integration Suite are core for integration: Integration Assessment, Cloud Integration, and API Management. Integration Assessment allows you to evaluate your integration landscape and strategy and identify the best-fit integration technologies and tools for your scenarios. Cloud Integration allows you to design, deploy, and monitor integration flows between cloud and on-premise systems using various adapters and protocols. API Management allows you to create, publish, secure, and monitor APIs across different environments and platforms. Reference: Integration Software | SAP Integration Suite, Modernize Integration with SAP Integration Suite | openSAP
NEW QUESTION # 43
You want to publish a new API product to the API business hub enter-prise. What is a requirement?
- A. At least two deployed API Proxies
- B. At least one deployed API Provider
- C. At least one deployed API Proxy
- D. At least two deployed API Providers
Answer: C
Explanation:
To publish a new API product to the API business hub enterprise, you need at least one deployed API proxy as a requirement. An API proxy is an API that acts as an intermediary between an API provider and an API consumer. It can be used to add security, monitoring, caching, transformation, and other features to the API provider. An API product is a bundle of one or more API proxies that are grouped together for a specific business scenario or use case. To create an API product, you need to select one or more deployed API proxies from your API portal and provide some metadata, such as name, title, description, quota limits, and so on. Then you can publish your API product to the API business hub enterprise, which is a centralized platform for discovering, consuming, and managing APIs. Reference: Create an API Proxy | SAP Help Portal, Create a Product | SAP Help Portal
NEW QUESTION # 44
......
Maximum Grades By Making ready With C_CPI_2404 Dumps: https://examsboost.realexamfree.com/C_CPI_2404-real-exam-dumps.html
