Pass CheckPoint 156-590 exam Dumps 100 Pass Guarantee With Latest Demo
The 156-590 PDF Dumps Greatest for the CheckPoint Exam Study Guide!
NEW QUESTION # 16
At what point is the Anti-Bot blade enforced?
- A. Post-infection
- B. Pre-infection
- C. Post-inspection
- D. Pre-inspection
Answer: A
Explanation:
The correct answer is B. Post-infection . Anti-Bot is the Threat Prevention blade focused on identifying and stopping bot-infected hosts after compromise indicators appear. Check Point documentation explicitly describes Anti-Bot as performing post-infection detection of bots on hosts and preventing bot damage by blocking command-and-control communications. The broader Threat Prevention guide also lists Anti-Bot as post-infection detection and explains that it uses ThreatCloud intelligence and multiple detection methods to identify bot activity.
This differs from IPS and Anti-Virus positioning. IPS and Anti-Virus are commonly understood as pre- infection controls because they attempt to block exploit traffic or malicious files before the host is compromised. Anti-Bot, by contrast, assumes the possibility that a host may already be infected and focuses on detecting outbound C & C communication, botnet behavior, malicious destinations, and other compromise evidence. Pre-inspection and post-inspection are not valid lifecycle categories for this blade in the exam context. In real operations, Anti-Bot is especially valuable for finding infected internal machines that bypassed earlier preventive controls or became infected off-network. Reference topics: Anti-Bot Software Blade, post-infection detection, Command and Control prevention, ThreatCloud intelligence, botnet behavior detection.
NEW QUESTION # 17
Task: View and interpret Threat Prevention event in SmartEvent.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartEvent > Events tab.
2- Filter by Category: Threat Prevention.
3- Open a specific event to see attack vector, target IP, and action.
4- Click "Show Packet Data" to analyze payload.
5- Cross-reference with IPS protections.
NEW QUESTION # 18
What is the name of the default Threat Prevention Profile?
- A. Basic
- B. Standard
- C. Optimized
- D. Strict
Answer: C
Explanation:
The correct answer is D. Optimized . In Check Point Threat Prevention, profiles define how the gateway applies protections across blades such as IPS, Anti-Bot, Anti-Virus, Threat Emulation, and Threat Extraction.
The default profile is Optimized , because it balances effective security with acceptable gateway performance. Check Point documentation states that the Optimized profile is activated by default and that it gives excellent security with good gateway performance.
This design reflects the practical tradeoff in enterprise Threat Prevention: not every protection should be enabled at the most aggressive setting on every gateway, because high-impact protections can increase CPU consumption, latency, and inspection overhead. The Optimized profile uses criteria such as protection severity, confidence, and performance impact to activate protections that are broadly useful without creating unnecessary operational cost. Basic is less aggressive and is intended for lower-impact protection coverage.
Strict provides wider coverage but can affect performance more significantly. Standard is not one of the default Threat Prevention profiles in this context. Reference topics: Threat Prevention Profiles, default profile behavior, Optimized Protection Profile settings, blade activation, security/performance balance.
NEW QUESTION # 19
Task: Test action taken for suspected bot-infected host.
Answer:
Explanation:
See the Explanation.Explanation:
1- Generate outbound suspicious DNS request (e.g., using simulated botnet domain).
2- Review logs in SmartConsole > blade:"Anti-Bot".
3- Confirm whether the connection was blocked or allowed.
4- Validate host quarantine action, if configured.
5- Check endpoint if agent alerts were triggered.
NEW QUESTION # 20
Task: Check the health of the Threat Prevention blades.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: cpview > Threat Prevention section.
3- Check CPU, memory, and update status.
4- Look for blade-specific errors or crashes.
5- Use cpstat threat-prevention for CLI summary.
NEW QUESTION # 21
Task: Compare two custom profiles for audit validation.
Answer:
Explanation:
See the Explanation.Explanation:
1- Export both profiles via SmartConsole.
2- Use external diff tool or compare policy settings manually.
3- Focus on blade settings, confidence levels, and exceptions.
4- Document differences and justify configuration choices.
5- Store comparison for audit records.
NEW QUESTION # 22
Which is NOT true of Threat Prevention policy application?
- A. Only applied after traffic is accepted by Access Control Policy
- B. Traffic is matched against all applicable layers at the same time
- C. Only applies first matched rule
- D. Applied as ordered layer
Answer: B
Explanation:
The correct answer is B. Traffic is matched against all applicable layers at the same time . Threat Prevention policy evaluation is not best described as a flat simultaneous match against all applicable layers.
Check Point documentation explains that Threat Prevention Policy Layers are Ordered Layers , and that each ordered layer calculates its action separately from the other layers. In a single-layer policy package, the enforced rule is the first matched rule. In multiple-layer policy behavior, matching and enforcement are determined by the layer calculations and the applicable action logic, rather than by one undifferentiated simultaneous match model.
Option A is true because Threat Prevention inspection is applied after the Access Control policy allows the connection; traffic dropped or rejected by Access Control does not proceed to Threat Prevention enforcement.
Option C is true for a single Threat Prevention layer because the first matching rule is enforced. Option D is also true because Threat Prevention uses ordered policy-layer behavior. The false statement is therefore option B. Reference topics: Threat Prevention Policy, Ordered Layers, first-match rule behavior, Access Control before Threat Prevention, multi-layer enforcement logic.
NEW QUESTION # 23
Task: Check if IPS blade is inspecting encrypted traffic.
Answer:
Explanation:
See the Explanation.Explanation:
1- Confirm HTTPS Inspection is enabled on the gateway.
2- Navigate to Threat Prevention > Protections.
3- Check protections related to SSL/TLS.
4- Confirm visibility of SSL payloads in logs.
5- Use HTTPS test traffic and review detection.
NEW QUESTION # 24
Are Cleanup Rules mandatory in a Threat Prevention Policy?
- A. A Cleanup Rule is required in a Basic Profile.
- B. Cleanup Rules are not strictly required in the Threat Prevention Policy.
- C. Cleanup Rules are only required, if the Access Control Policy does not have one.
- D. Cleanup Rules are not required if you are using the Basic Profile.
Answer: B
Explanation:
The correct answer is C. Cleanup Rules are not strictly required in the Threat Prevention Policy . Threat Prevention policy behavior is governed by ordered layers and rule matching, but an administrator is not forced to create an explicit cleanup rule in every Threat Prevention rulebase. Check Point documentation explains that a Threat Prevention Rule Base can contain multiple Policy Layers and that each layer calculates its action separately. For a single layer, the enforced rule is the first rule matched; for multiple layers, the final behavior depends on the layer matches and resulting action logic.
A cleanup rule is still a strong operational best practice because it makes the terminal behavior explicit, easier to audit, and easier for operations teams to troubleshoot. Without an explicit cleanup rule, behavior depends on the layer's implicit cleanup logic and the policy architecture. Check Point Security Management documentation shows that implicit cleanup behavior exists at the layer level and can be configured as Drop or Accept in the Layer Editor. The question asks whether cleanup rules are mandatory, not whether they are recommended. Options A and D incorrectly tie cleanup rule requirement to the Basic Profile. Option B incorrectly links Threat Prevention cleanup requirements to the Access Control cleanup rule. Reference topics: Threat Prevention Policy Layers, implicit cleanup rule, explicit cleanup best practice, Layer Editor behavior.
NEW QUESTION # 25
What does the profile cleanup option do?
- A. Adjusts all settings to Detect only
- B. Deletes all Exemptions
- C. Removes all Administrator overrides
- D. Removes corrupt updates
Answer: C
Explanation:
The correct answer is B. Removes all Administrator overrides . Profile Cleanup is a Threat Prevention profile hygiene tool used mainly in IPS protection management. When administrators manually override protections during tuning, exception handling, false-positive analysis, emergency hardening, or staged deployment, those manual changes can accumulate and cause the profile to deviate from its intended design.
Check Point's IPS Protections documentation states that the Profile Cleanup window lets the administrator select actions such as Remove all user modified and Clear all staging , then install the Threat Prevention Policy.
This directly maps to removing administrator overrides. The option does not automatically set all protections to Detect only; Detect is an action used in specific protection or staging contexts, not the purpose of Profile Cleanup. It also does not delete exemptions, because exception rules are separate policy constructs. It does not repair or remove corrupt updates; IPS update package handling is managed through the update and revert workflow. Profile Cleanup is best understood as a reset mechanism: it clears manual activation or staging deviations so the profile can return to its baseline activation policy and blade settings. Reference topics: IPS Protections, Profile Cleanup, Remove all user modified, Clear all staging, Threat Prevention Policy installation.
NEW QUESTION # 26
Task: Enable Threat Prevention blades including IPS on a Security Gateway via SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click your Security Gateway.
3- Go to the "General Properties" tab.
4- Check "IPS", "Anti-Bot", and "Anti-Virus".
5- Click OK, publish changes, then install the policy.
NEW QUESTION # 27
What Track - Settings Forensics does not?
- A. Check Point researchers use advanced forensics details for troubleshooting and attack analysis.
- B. Communicate forensics data collected to Government Agencies.
- C. Forensics details also include Security Gateway statistics, which are sent to the Check Point Cloud.
- D. When enabled, advanced forensics detailed information is included in logs.
Answer: B
Explanation:
The correct answer is D. Communicate forensics data collected to Government Agencies . The Forensics tracking option exists to enrich Threat Prevention logs with deeper technical context for analysis and troubleshooting. Check Point documentation states that the Forensics option adds fields to Threat Prevention logs and that the additional information gives a deeper understanding of an attack. The Monitoring Threat Prevention guidance also explains that Advanced Forensics Details can include protocol-specific details for DNS, FTP, SMTP, HTTP, and HTTPS, and that this information is used by Check Point researchers to analyze attacks.
The purpose is security analysis, incident investigation, and support-quality evidence collection, not government reporting. Options A and B accurately describe the function of Forensics tracking. Option C reflects the broader idea that forensic and diagnostic details may include gateway-related technical data for Check Point analysis, depending on configuration and feature behavior. Option D is the false statement because Check Point Threat Prevention Forensics is not defined as a mechanism for transmitting collected forensic data to government agencies. In production, enabling Forensics should be treated as a deliberate logging and privacy decision because it may add protocol and transaction context to logs. Reference topics:
Threat Prevention Track Options, Forensics tracking, Advanced Forensics Details, Logs & Monitor, attack analysis.
NEW QUESTION # 28
What is the purpose of the Profile Cleanup option?
- A. It merges protection settings from multiple profiles into the Optimized Profile.
- B. It eliminates protections automatically which hasn't been used for a predefined amount of time.
- C. It serves as a cleanup policy if none of the protection matches the packets.
- D. It lets you start over by removing all administrator overrides.
Answer: D
Explanation:
The correct answer is A. It lets you start over by removing all administrator overrides . Profile Cleanup is a profile-maintenance function used when manual IPS protection changes have accumulated and the administrator wants to return the profile to its intended baseline logic. Check Point's IPS Protections documentation describes the Profile Cleanup window as offering actions such as Remove all user modified and Clear all staging , followed by installing the Threat Prevention Policy.
This makes the feature a reset and hygiene mechanism, not a rulebase cleanup rule. It removes administrator- level overrides that may have been introduced during tuning, temporary mitigation, testing, exception handling, or staged rollout of protections. Option B is incorrect because Profile Cleanup does not merge settings from several profiles into the Optimized Profile. Option C is incorrect because unmatched traffic handling is controlled by policy/rule behavior, not by Profile Cleanup. Option D is incorrect because protections are not automatically removed based on usage age by this option. The administrative value of Profile Cleanup is control: it lets the security architect re-align a profile with its default or intended activation criteria. Reference topics: IPS Protections, Activation Overrides, Profile Cleanup, Staging, Threat Prevention Policy installation.
NEW QUESTION # 29
What is the purpose of the Packet Capture Track option?
- A. You can visualize traffic information with a third-party XDR tool.
- B. You can specify a threshold value which serves as a limit after which the connection will be reset.
- C. The security Gateway sends a packet capture file along with the log file. The former can by analyzed with an external tool, such as WireShark.
- D. You can specify the time after which the connection has to be reinitialized.
Answer: C
Explanation:
The correct answer is B. The Security Gateway sends a packet capture file along with the log file. The former can be analyzed with an external tool, such as Wireshark . Packet Capture is a tracking enhancement used when logs alone are not enough to understand the traffic that triggered a security event.
Check Point documentation explains that Packet Capture lets administrators capture network traffic and that the packet-capture content provides greater insight into the traffic that generated the log. When this feature is activated, the Security Gateway sends a packet-capture file with the log to the Log Server.
This is especially useful for IPS and Threat Prevention troubleshooting because analysts can inspect payload structure, headers, protocol behavior, retransmissions, and exact traffic context behind a prevention or detection event. Packet captures can then be opened in external protocol-analysis tools such as Wireshark for deeper investigation. Option A is incorrect because Packet Capture is not specifically an XDR visualization feature. Option C is unrelated to tracking and describes a timeout-style behavior. Option D describes threshold
/reset logic, not packet evidence collection. Reference topics: Packet Capture Track option, Logs & Monitor, Threat Prevention event analysis, IPS troubleshooting, packet-level evidence.
NEW QUESTION # 30
Task: Confirm Internet access from the Security Gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Use curl https://www.google.com.
3- Check route table via netstat -rn or ip route.
4- Ensure DNS is resolving (as in Q07).
5- Check NAT policy allows outbound Internet access.
NEW QUESTION # 31
Task: Enable HTTPS inspection for Threat Prevention profile to scan encrypted content.
Answer:
Explanation:
See the Explanation.Explanation:
1- Ensure HTTPS Inspection is enabled on gateway.
2- In the custom profile, enable Inspect HTTPS traffic under Anti-Virus and Anti-Bot.
3- Set CA certificate deployment for clients.
4- Save changes and install both TP and HTTPS inspection policies.
5- Validate detection using test HTTPS malware download.
NEW QUESTION # 32
Task: Create a protection exception for an IPS protection triggered during backup scans.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to IPS Protections > Filter the protection name.
2- Click "Add Exception."
3- Define the backup server's IP as source.
4- Set Action to "Detect" or "Inactive."
5- Save, publish, and recheck log results.
NEW QUESTION # 33
Which of the following is a searchable field in IPS?
- A. protection
- B. update time
- C. threat year
- D. release date
Answer: A
Explanation:
The correct answer is B. protection . In the IPS Protections browser, Check Point exposes protection metadata so administrators can search, filter, sort, review, and tune IPS protections. The official IPS Protections page states that the Protection Browser shows Threat Prevention Software Blade protection types and important usage indicators. The documented IPS protections summary table includes Protection as a default column, defined as the name of the protection , with its description shown in the lower pane.
This directly supports "protection" as a searchable or browsable field in IPS. Administrators use it to find a specific IPS signature, exploit protection, protocol protection, or vulnerability-related protection. Other displayed metadata can include industry reference, performance impact, severity, confidence level, and profile activation state, but the exam option that matches the official IPS browser field is Protection . "Update time,"
"threat year," and "release date" are not the standard field names presented in this question. Operationally, searching by protection name is central to exception creation, override review, staging validation, and incident follow-up because it links a log or protection event back to the exact IPS protection object. Reference topics:
IPS Protections, Protection Browser, protection name field, IPS summary table, filter and search workflow.
NEW QUESTION # 34
Task: Configure inspection settings to reduce performance impact on a busy gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- Navigate to Threat Prevention > Inspection Settings in SmartConsole.
2- Choose "Performance Optimization" tab.
3- Lower detection sensitivity or exclude internal trusted networks.
4- Save changes and apply policy to the relevant gateways.
5- Monitor logs for false negatives and adjust as needed.
NEW QUESTION # 35
What is the default Anti-Virus protected scope interface settings?
- A. DMZ
- B. External
- C. External and DMZ
- D. All
Answer: B
Explanation:
The correct answer is C. External . Anti-Virus protected scope settings define which traffic direction and interface types are sent for file inspection. Check Point explains that these settings are based on interface type, such as internal or external, and traffic direction, such as incoming or outgoing. In the Anti-Virus Protected Scope section, Check Point defines the option Inspect incoming files from and lists interface choices including External , External and DMZ , and All . The External choice means the gateway inspects incoming files from external interfaces, while files from DMZ and internal interfaces are not inspected.
The default exam answer is therefore External: the baseline Anti-Virus behavior focuses on inbound files arriving from untrusted external interfaces, which is the most common malware-introduction path for perimeter deployments. Option A is too narrow because DMZ alone would ignore Internet-to-user inbound exposure. Option B expands inspection to DMZ traffic, which is valid as a configuration choice but not the default answer. Option D is broader still and increases inspection coverage and resource use, but it is not the default protected-scope setting in this question. Reference topics: Anti-Virus Settings, Protected Scope, interface topology, incoming file inspection, External interface classification.
NEW QUESTION # 36
......
Read Online 156-590 Test Practice Test Questions Exam Dumps: https://examsboost.realexamfree.com/156-590-real-exam-dumps.html
