New 2021 Guaranteed Success with RealExamFree NCM-MCI5.15 Dumps Nutanix PDF Questions
Exceptional Practice To Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI-5.15) Pass the First Time
NEW QUESTION 36
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. On a CVM. run the command a Hash ntpq -pn.
- B. Restart the chronos service on all CVMs.
- C. Restart genesis on all CVMs.
- D. Confirm that the NTP servers are reachable from the CVMs.
Answer: A,D
Explanation:
Ref: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000bmjeCAA#Review_ntpq
NEW QUESTION 37
An administrator manages the following two Nutanix AOS 5.15 cluster environment:
* Corp-cluster-01
* Corp-cluster-02
The VM images must be available only on Corp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.
Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)
- A. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster
- B. Set the policy enforcement to Hard.
- C. Set the policy enforcement to Soft.
- D. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.
Answer: A,B
Explanation:
Ref: https://next.nutanix.com/community-blog-40/nutanix-just-made-ahv-image-management-painless-33144
NEW QUESTION 38
Refer to the exhibit.
An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)
- A. VMs have one vCPU configured.
- B. VMs have multi-queue disabled.
- C. VMs have more than one vCPU.
- D. Workloads are multi-threaded.
Answer: C,D
Explanation:
NEW QUESTION 39
A customer has Metro Availability configured in Automatic Resume Mode between Site A and Site B What happens to VMs if Primary Site A has full network failure?
- A. Automatic protection domain promotion in Site B. VMs automatically restart in Site B
- B. VMs continue to run on Site A following an automatic disable of protection domains.
- C. An administrator must promote protection domains in Site B for VMs to restart.
- D. An administrator must unwitness in Site B and promote protection domains in Site B for VMs to restart
Answer: A
Explanation:
Ref: https://support-portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v55:sto-metro-availability-witness-c.html
NEW QUESTION 40
An administrator is monitoring the Nutanix v5.15-based AOS cluster performance logs and notices that a SQL server VM is greatly exceeding its intended maximum IOPS. The administrator has confirmed that a QoS policy was previously created for the group of VMs this server is a member of.
What are two reasons that this VM would exceed its maximum configured IOPS from the QoS Policy? (Choose two.)
- A. It was cloned from another SQL Server VM that was a member of the QoS Policy.
- B. The SQL Server VM has volume groups attached.
- C. The VM was not created as an AFS virtual machine.
- D. The VM is missing the required snapshot needed to implement the QoS Policy.
Answer: B,C
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_18:mul-storage-qos-pc-c.html
NEW QUESTION 41
An administrator is deploying a new application to a Nutanix Enterprise Cloud. The application requires a security to prevent unauthorized access. The application also uses many non-standard ports that are unique to it. Security should not be changed for existing applications.
What should the administrator do to meet these requirement?
- A. Use existing categories for the VMs. and create new security policies to use the existing categories.
- B. Create new categories for the VMs, and create new security policies that include the new categories.
- C. Use existing categories for the VMs and modify existing security policies to include the specific port.
- D. Create new categories for the VMs, and modify existing security policies to include the new categories.
Answer: B
NEW QUESTION 42
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Database VM is experiencing high CPU ready time.
- B. VM Flash Mode reduces SSD tier capacity for VMs.
- C. Curator scans causes by ILM constantly moving data.
- D. Controller VM is experiencing high CPU ready time.
Answer: D
NEW QUESTION 43
Refer to the exhibit.
What is the purpose of eth2 on the CVMs?
- A. RDMA Network Segmentation
- B. Remote site connectivity
- C. Network Segmentation
- D. iSCSI connectivity
Answer: C
Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291
NEW QUESTION 44
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed. The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create a firewall rule that blocks VM traffic but permits diagnostic access
- B. Disable the vNIC on the affected VM
- C. Quarantine the VM using the Forensic Method
- D. Create a security policy with a service chain directing that VMs traffic to the firewall VM
Answer: C
Explanation:
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 45
An administrator learns that some security settings in a cluster have been changed. The environment is out of compliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?
- A. Defense Information Systems Agency STIG enforcement
- B. Security Configuration Management Automation (SCMA)
- C. Cluster Lockdown with strong password enforcement
- D. Advanced Intrusion Detection Environment (AIDE)
Answer: B
Explanation:
Ref: http://myvirtualcloud.net/nutanix-scma-the-security-feature-that-could-save-your-organization/
NEW QUESTION 46
A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?
- A. Start with a cluster containing three or more nodes
- B. Plate the SAP HANA Database on the same socket as CVM
- C. Do not enable compression, deduplication. or erasure coding on the storage container
- D. Enable only compression for the container that contains the Production database
Answer: C
Explanation:
Ref:
NEW QUESTION 47
Refer to the exhibit.
An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change the Directory URL to use an IP rather than a name
- B. Change the plct from 389 to 636
D Change the Domain to use an IP rather than a name - C. Change leaps to https
Answer: B
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-authentication-pc-t.html
NEW QUESTION 48
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Use multiple subnets for iSCSI traffic
- B. Enable RSS (Receive Side Scaling)
- C. Distribute workload across multiple virtual disks
- D. Enable thick provisioning on the Volume Group(s)
Answer: B,C
Explanation:
NEW QUESTION 49
Refer to the exhibit.
An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?
- A. Resolve all alerts and re-import the disks to make sure there is no service disruption.
- B. Check status of applications running on the cluster and call support
- C. Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.
- D. Reseat all disks immediately. If this does not help, reseat the nodes.
Answer: B
NEW QUESTION 50
An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?
- A. Choose Migrate on the Primary site within the Data Protection Dashboard
- B. Click Activate on the Secondary site and run deactive NCLI command on Primary site
- C. Choose Migrate on the Secondary site within the Data Protection Dashboard
- D. Click Activate on the Secondary site within the Data Protection Dashboard
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:wc-protection-domain-failover-wc-t.html
NEW QUESTION 51
An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?
- A. Post-Process Compression
- B. Flash Mode
- C. Inline Compression
- D. Cache Dedup
Answer: A
NEW QUESTION 52
An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to the Internet.
Which two steps must be completed to update the firmware? (Choose two.)
- A. Configure LCM with a URL to access the firmware bundle.
- B. Download a dark site bundle and stage it on an internal webserver.
- C. Download the updated firmware .tgz file from the Nutanix portal.
- D. Select Upgrade Software, then select disks and upload the updated firmware.
Answer: A,B
NEW QUESTION 53
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
What action should be taken to reclaim the storage capacity?
- A. Unmount the Volume Group and then Remount the Volume Group
- B. Run Defrag on the Linux VM
- C. Shrink the Volume Group that is associated with the Linux VM
- D. Enable the unman operation on the Linux VM
Answer: A
Explanation:
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134
NEW QUESTION 54
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at 15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected 5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?
- A. Configure the protection domain to take snapshots on 15-minute intervals
- B. Change the protection domain to use Async DR
- C. Fix a connectivity issue because the protection domain reverted to Async
- D. Utilize Metro Availability to meet this requirement
Answer: C
NEW QUESTION 55
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. The system is deployed as a single FSVM.
- B. Access Based Enumeration is not enabled.
- C. NFS default access is set to Read Only.
- D. Multi-protocol access is not configured.
Answer: A
Explanation:
NEW QUESTION 56
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
- B. The performance test is generating small block random 10.
- C. The VM's iSCSI traffic is being routed to the data services IP subnet
- D. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
Answer: A
NEW QUESTION 57
An administrator has an existing Nutanix seven-node cluster running at RF2 that must be changed to have the following capabilities:
* RF3 set for the cluster
* Performance tier deduplication
What is the minimum memory needed on the CVMs to allow for these capabilities?
- A. 32GB
- B. 28GB
- C. 20G?
- D. 24GB
Answer: B
Explanation:
Ref: https://next.nutanix.com/how-it-works-22/rf2-rf3-requirements-37206#:~:text=Controller%20VMs%20must%20be%20configured,for%20the%20feature)%20of%20memory.
NEW QUESTION 58
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. Hard
- B. Soft
- C. External
- D. Internal
Answer: B
Explanation:
NEW QUESTION 59
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Application Security Policy
- B. An Isolation Environment Policy
- C. A Whitehst-Based Policy
- D. A Quarantine Policy
Answer: B
Explanation:
NEW QUESTION 60
......
NCM-MCI5.15 EXAM DUMPS WITH GUARANTEED SUCCESS: https://examsboost.realexamfree.com/NCM-MCI5.15-real-exam-dumps.html
