The Most Efficient JN0-104 Pdf Dumps For Assured Success [2023]
We offers you the latest free online JN0-104 dumps to practice
NEW QUESTION # 57
Referring to the Exhibit,
What information is provided about the route to 192.168.47.0/24?
Choose Two
- A. There is a single next-hop available to 192.168.47.0/24
- B. There are two next-hops available to 192.168.47.0/24
- C. There is a single active route to 192.168.47.0/24
- D. There are two active route to 192.168.47.0/24
Answer: B,C
NEW QUESTION # 58
Which of these commands will cause a matching packet to be dropped and will send a notification message?
- A. set routing-options static route 192.168.1.1/32 reject
- B. set routing-options static route 192.168.1.1/32 notify
- C. set routing-options static route 192.168.1.1/32 drop
- D. set routing-options static route 192.168.1.1/32 discard
Answer: A
NEW QUESTION # 59
Your junos device is using the configuration shown in the exhibit, you notice that the 172.17.23.10/30 address is incorrect and should be 172.17.23.9/30.
What are two commands that would solve the problem?
- A. [edit interfaces] user@router# delete ge-0/0/2.0 family inet address 172.17.23.10
- B. [edit interfaces] user@router# rename ge-0/0/2.0 family inet address 172.17.23.10/30 to address 172.17.23.9/30
- C. [edit interfaces] user@router# set ge-0/0/2.0 family inet address 172.17.23.9
- D. [edit interfaces] user@router# replace pattern 172.17.23.10 with 172.17.23.9
Answer: B,D
NEW QUESTION # 60
What are two benefits of class of service (CoS)? (Choose two.)
- A. CoS can manage traffic congestion
- B. CoS can increase the performance of a slow network.
- C. CoS can increase network bandwidth.
- D. CoS can prioritize latency-sensitive traffic
Answer: A,D
NEW QUESTION # 61
You are considering to upgrade from 19.1R1 and want to ensure that only bug fixes are included. Which two software versions should you use in the current situation? Choose Two
- A. 19.1R1-S2
- B. 19.1R3
- C. 19.3R2
- D. 19.3R1-S1
Answer: A,B
Explanation:
R release : Maintenance and introduce bug fixes
19.1R1 ==> 19.1R2 introduces only bug fixes 19.1R1 ==> 19.2R2 Introduces new features
NEW QUESTION # 62
Which layer of the OSI Model converts frames into bits?
- A. Network Layer
- B. Application Layer
- C. Physical Layer
- D. Data Link Layer
Answer: C
NEW QUESTION # 63
What is a valid action for a firewall filter?
- A. then count
- B. then allow
- C. then drop
- D. then community add
Answer: A
NEW QUESTION # 64
Click the Exhibit button
A packet destined to the 172.27. 102.65 IP address is received by the ge-0/0/1.0 interface on your Junos device. The input firewall filter shown in the exhibit is applied to the ge-0/0/1.0 interface.
Which two actions are performed in this scenario? (Choose two.)
- A. The packet is logged
- B. The packet is accepted
- C. The packet is counted
- D. The packet is discarded.
Answer: B,C
NEW QUESTION # 65
Exhibit.
You have the policy configuration shown in the exhibit applied to your BGP peering.
You find that your customer routes coming from the 10.1.1.0/24 network are being rejected.
Which command should be used to correct the problem?
- A. [edit policy-options policy-statement my-policy]
- B. [edit policy-options policy-statement my-policy]
user@router# insert term 2 before term 1 - C. [edit policy-options policy-statement my-policy]
user@router# copy term 2 to term 0 - D. [edit policy-options policy-statement my-policy]
user@router# insert term 1 before term 2
Answer: B
NEW QUESTION # 66
You must verify that interface ge-0/0/0.0 is administratively up and that the link is up.
In this scenario, which command will accomplish this task?
- A. show chassis fpc pic-status
- B. show interfaces terse
- C. show system information
- D. show configuration interfaces ge-0/0/0.0
Answer: B
Explanation:
Ref: show interfaces | Junos OS | Juniper Networks
"show interfaces
...
Sample Output
...
show interfaces terse
user@host> show interfaces terse
Interface Admin Link Proto Local Remote
ge-0/0/0 up up
ge-0/0/0.0 up up inet 10.209.4.61/18
gr-0/0/0 up up
..."
NEW QUESTION # 67
For how many minutes is the configuration activated when the commit confirmed command is used?
- A. 5 minutes
- B. 30 minutes
- C. 3 minutes
- D. 10 minutes
Answer: D
NEW QUESTION # 68
Which operational command allows you to quickly verify the state of all physical and logical interfaces?
- A. show interfaces summary
- B. show interfaces routing
- C. show interfaces terse
- D. show interfaces brief
Answer: C
NEW QUESTION # 69
Click the Exhibit button.
Which operational mode command in Junos OS produces the output shown in the exhibit?
- A. show system reboot
- B. show system commit
- C. show system users
- D. show system connections
Answer: B
NEW QUESTION # 70
You are asked to configure a Junos device to perform regular configuration backups Which feature will you configure under the [edit system) hierarchy to accomplish this task?
- A. tracing
- B. syslog
- C. archival
- D. backup-router
Answer: C
NEW QUESTION # 71
What are three functions of the RE? (Choose three.)
- A. to enforce stateless firewall filters
- B. to monitor the chassis
- C. to maintain the forwarding tables
- D. to manage the PFE
- E. to implement policing
Answer: B,C,D
NEW QUESTION # 72
What are two valid initial configuration methods supported on Junos devices? (Choose two)
- A. J-Web
- B. Junoscope
- C. PCMCIA flash card
- D. CLI
Answer: A,D
NEW QUESTION # 73
Which of these about transit traffic is true?
- A. Traffic that is addressed to the chassis, requires special handling by the RE before it can be forwarded out an egress port.
- B. Traffic that enters an ingress port, is compared against the forwarding table and forwarded out an egress port.
- C. Traffic that requires special attention and does not pass through the device.
- D. Traffic that generates an ICMP message.
Answer: B
NEW QUESTION # 74
Which parameter of the monitor traffic command should be used with caution when considering storage space on a Junos device?
- A. detail
- B. extensive
- C. write-file
- D. layer2-headers
Answer: C
NEW QUESTION # 75
Which statement about the show chassis hardware Command is correct?
- A. The command provides a list of supported hardware components and environmental thresholds.
- B. The command provides 2 list of supported hardware components and their current operating status
- C. The command provides a list of installed hardware components, including serial numbers and model numbers.
- D. The command provides a list of all current hardware utilization statistics and operational status
Answer: C
NEW QUESTION # 76
Referring to the exhibit, which type of classifier is being used in this CoS configuration?
- Exhibit -
[edit firewall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
from {
source-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER;
}
address 192.168.200.1/24;
}
}
- Exhibit -
- A. multifield
- B. policer
- C. forwarding policy
- D. behavior aggregate
Answer: A
NEW QUESTION # 77
Which command produced the output shown in the exhibit?
- A. Show interfaces terse
- B. Show interfaces extensive
- C. Show interfaces filters
- D. Show interfaces summary
Answer: A
NEW QUESTION # 78
Which of these is true about the information shown in the exhibit?
-----Exhibit-----
Amnesiac (ttyu0)
login:
-----Exhibit-----
- A. The factory default configuration is running on the device.
- B. The device memory has been corrupted.
- C. The Junos operating system did not boot correctly.
- D. The device was recently upgraded to a newer version of Junos.
Answer: A
NEW QUESTION # 79
What will be the output of the command show | compare rollback 1?
- A. the difference between the current active configuration and the current candidate configuration
- B. the difference between the candidate configuration and the active configuration from two commits ago
- C. the difference between the candidate configuration and the active configuration from one commit ago
Answer: B
NEW QUESTION # 80
Click the Exhibit button.
Your Junos device is using the configuration shown in the exhibit. You notice that the 172.17.23.10/30 address Is Incorrect and should be 172.17.23.9/30.
What are two commands that would solve this problem? (choose two.)
- A. [edit interfaces]
use reroute r# delete ge-0/0/2.0 family inet address
172-17.23.10 - B. [edit interfaces]
user@router# set ge-0/0/2.0 family inet address - C. [edit interfaces]
user@router# rename ge-0/0/Z0 family inet address
172.17.23-10/30 to address 172.17.23.9/30 - D. [edit interfaces]
user@router= replace pattern 17Z1723.10 with
172.17.23.9
Answer: C,D
NEW QUESTION # 81
Which protocol is responsible for learning an IPv6 neighbor's IMAC address?
- A. Neighbor Discovery Protocol (NDP)
- B. Address Resolution Protocol (ARP)
- C. Media Access Control Security (MACsec)
- D. Network Address Translation (NAT)
Answer: C
NEW QUESTION # 82
......
JN0-104 PDF 100% Cover Real Exam Questions: https://examsboost.realexamfree.com/JN0-104-real-exam-dumps.html
